Calibration Parameters

P.J Bonner are specialists in calibration parameters. We can provide a traceable calibration service to a large number of different parameters, and use only reputable, reliable test equipment that has been certified and is traceable to a national standard. Below is sample of what parameters we can calibrate:

 

Parameter Range
Air Flow/Velocity 0.25 to 30 m/sec
Chlorine 0-2.00 mg/L as CI₂
0-6.5 mg/L as CI₂
Conductivity 0 to 2000 mS/cm
Current 0 to 20mA
Density 0, 50, 100%
Dimensional 0 to 150mm
0 – 360˚
Distance 0 to 5 Meters
Electrical 0 to 1000 Amps
0 to 1000V, 0 to 20mA, TC, PT100, Hz
0 to 1000V, 0 to 20mA
12V & 24mA
Flow 0 to 300 L/Min
0 – 120 LITRES
Humidity 0 to 100%
Level Any
Metal Detector Ferrous, Non-Ferrous, Stainless Steel
Moisture 0-210g (120°C)
pH 4,7,9 pH
Pressure 0 to 2mBar & 0 to 200 mBar
Vacuum to 700 Bar
Resistance 6 Decades 10Ω to 1 MΩ
RPM 3 to 99,999 RPM
Salt 11.3%, 33.0%, 75.4%
Temperature -200 to 1350˚C
Temperature – Mapping -15 to 50°C
Temperature – Mapping −200 to 350 °C
Temperature (High Range) 0 to 650˚C
Temperature (Low Range) -50 to 140°C
Temperature (PT100) -200 to +800˚C
Temperature (Thermocouple -200 to 1370°C
Time 0-60 Mins
Viscosity 500, 1000 centipoise
Weighing 1000Kgs (M1)
1mg to 5Kg (F1)

Copyright © 2017 P.J.Bonner | Designed by Inspiration Marketing